WASH&WHIPS SEAL - Exterior Seal & Shine Kit (Step 3)

Exterior Seal & Shine Kit

Lock in that clean car feeling. The final step in our 3-Step Detailing System delivers a lasting finish and deep protection.

Sonoma Ceramic Spray

Up to 10 full-body applications

Use 1–2oz per car

16oz

+

Daytona Tire Shine

Up to 32 tire applications

Use 0.5oz per tire

16oz

+

Suzuka Trim Coating

Up to 20 trim treatments

Use 0.75oz per car

16oz

How to Use the SEAL Exterior Protection Kit

Sonoma Ceramic Coating – Long-Lasting Exterior Protection
What it Does: Creates a hydrophobic, protective layer on your car’s paint to enhance gloss, repel water, and guard against UV and contaminants.

How to Use:
• Wash and dry the vehicle thoroughly before applying.
• Shake bottle well. Apply a few drops to an applicator pad.
• Work in 2x2 ft sections, wiping onto the surface in straight lines.
• Let the product sit for 30–60 seconds, then gently buff off with a microfiber towel.
• Avoid applying in direct sunlight or on hot surfaces. Allow 12–24 hours for full curing.

Daytona Tire Coating – Deep Black Tire Shine
What it Does: Restores and protects tire sidewalls with a satin or glossy finish. Helps repel dirt, water, and UV fading.

How to Use:
• Clean tires before applying for best adhesion.
• Shake bottle. Spray directly onto a tire applicator or foam sponge.
• Apply evenly across the tire sidewall.
• Let sit for a few minutes to absorb. For extra shine, apply a second coat.
• Do not use on tire treads.

Suzuka Rubber & Plastic Coating – Trim Restorer & Conditioner
What it Does: Revives faded plastics and rubber trims, while providing a layer of UV protection.

How to Use:
• Clean the surface first with a plastic-safe cleaner.
• Shake bottle. Apply a small amount to a microfiber applicator.
• Wipe evenly across rubber or plastic parts such as trim, moldings, bumpers, and seals.
• Let sit for a few minutes, then buff off any excess.
• Avoid contact with paint or glass—wipe off immediately if needed.

SEAL Exterior Protection Kit – FAQ

Usage Warnings & Material Safety Data Sheet:

For external use only. Do not ingest. Avoid contact with eyes, skin, and clothing. Use gloves and eye protection when applying. Use in a well-ventilated area and avoid breathing vapors or mist. In case of contact with eyes, rinse immediately with clean water for at least 15 minutes. If ingested, do not induce vomiting—seek immediate medical attention. Store products tightly closed in a cool, dry place away from heat or open flame. Keep out of reach of children and pets. Avoid spraying on hot surfaces or under direct sunlight.

Please use the link below for the MSDS (Material Safety Data Sheet):

Wash&Whips MSDS

Please Note: Seller makes no warranty, expressed or implied, nor accepts any responsibility for any direct or consequential damages beyond purchase price since seller has no control over user’s handling or effect of use.