WASH&WHIPS Sonoma 30M Pro Ceramic Coating for Cars (60ml)

Protect your car like a pro. Sonoma 30M is a high-performance ceramic coating packed with advanced silicone polymers, fluorides, and surface modifiers that lock in a glass-like shield on paint, trim, chrome, wheels—you name it.

• Up to 3 years (30 months) of protection

• Repels water, grime, bugs, bird droppings, UV rays & road salt

• Leaves a deep, slick gloss that turns heads

• Works on paint, plastic, chrome, glass, helmets, and boats

• DIY kit includes applicator + microfiber towel

• Cures in 12–24 hours (5–7 days for full bond)

• 60ml/2oz covers one standard vehicle

Apply it once. Keep your ride cleaner, shinier, and easier to maintain.
This isn’t wax. This is Sonoma 30M.

1. Wash & Dry the Vehicle
• Thoroughly wash your vehicle using a pH-neutral soap. • Dry completely using a clean microfiber towel.

2. Decontaminate the Surface (Optional but Recommended)
• Use a clay bar or iron remover to eliminate embedded contaminants. Follow up with an IPA or panel wipe to ensure the surface is bare and ready for bonding.

3. Apply the Coating
• Wrap the suede cloth around the applicator block.
• Apply a few drops of Sonoma 30M to the cloth.
• Work in small sections (2'x2'). Use a crosshatch motion (left-right, then up-down) for even coverage.

4. Let It Flash
Wait 1–3 minutes (depends on temperature and humidity) until you see a light rainbow sheen or haze.

5. Level the Coating
Gently buff the coated area with a clean microfiber towel to remove any excess and prevent high spots.

6. Let It Cure
• Avoid water contact for at least 12–24 hours.
• Full chemical bond forms in 5–7 days — no washing or exposure to harsh elements during this time.

Pro Tips:
• Apply in a shaded, well-ventilated area — avoid direct sunlight or high humidity.
• Use gloves and eye protection for safety.
• Do not apply to hot surfaces.

Sonoma 30M Ceramic Coating FAQs

Usage Warnings & Material Safety Data Sheet:

Warnings & Safety Information

For External Use Only
This product is intended for automotive surfaces only. Do not ingest.

Avoid Eye Contact
May cause serious eye irritation. If contact occurs, flush with clean water for at least 15 minutes. Seek medical attention if irritation persists.

Avoid Prolonged Skin Contact
May cause dryness or irritation. Wash affected area thoroughly with soap and water. Wear gloves if you have sensitive skin.

Use in a Well-Ventilated Area
Vapors may cause dizziness, nausea, or headaches in enclosed spaces. Always apply in a well-ventilated environment.

Do Not Inhale Vapors or Mists
Avoid breathing in product vapors during application. If symptoms like dizziness or nausea occur, move to fresh air immediately.

If Swallowed
Do not induce vomiting unless directed by a medical professional. Contact Poison Control or seek emergency medical care immediately.

Keep Out of Reach of Children and Pets
Store in a cool, dry place with the cap tightly closed.

Please use the link below for the MSDS (Material Safety Data Sheet):

Wash&Whips MSDS

Please Note: Seller makes no warranty, expressed or implied, nor accepts any responsibility for any direct or consequential damages beyond purchase price since seller has no control over user’s handling or effect of use.