SEAL Exterior Protection Kit – FAQ
A: Yes, Sonoma Ceramic Coating is safe for all glossy factory-painted finishes. Avoid using on matte finishes or vinyl wraps unless specified by the manufacturer.
A: No. Always apply in a shaded, cool area. Applying in direct sunlight or on a hot surface can cause streaking, high spots, and poor bonding.
A: Allow at least 12–24 hours of dry time after application. Avoid water contact or washing during this period to ensure proper curing and bonding.
A: If applied too heavily or not allowed to absorb properly, Daytona Tire Coating may sling. For best results, apply evenly and allow it to dry completely before driving.
A: Suzuka Rubber & Plastic Coating is designed for trim and rubber parts only. Avoid applying to paint or glass—wipe off immediately if contact occurs.
A: Yes. Clean and dry all surfaces thoroughly. Ceramic coating works best on freshly washed paint. Tires and trim should be clean and free of oils or old dressings.
A: Streaks or haze usually mean the coating wasn't buffed off completely or was applied too thick. Reapply a small amount to reactivate the area and buff thoroughly with a clean towel.